NCLA will get you licensed QUICKER and EASIER!
We have the Utah Contractor License Information you need. Receive trusted guidance on registering your business, documenting your qualifications, passing your state exams, avoiding exams, using reciprocity and qualifying individuals.
Contact a license professional to get properly licensed today!
Utah Division of Occupational and Professional Licensing:
doplweb@utah.gov
- P.O. Box 146741 • Salt Lake City, Utah 84114-6741
- Phone: (801) 530-6628 • Toll-Free in Utah: (866) 275-3675 • Fax: (801) 530-6511
Contractor Fees:
$210.00 non-refundable application-processing fee which includes the first classification.
$210.00 for each additional Primary Classifications (E-100, B-100 or R-100)
$110.00 for each additional Supplemental Classification
All $110 Fee:
Journeyman Electrician (JE)
Residential Journeyman Electrician (RJE)
Master Electrician (ME)
Residential Master Electrician (RME)
Journeyman Plumber (JP)
Residential Journeyman Plumber (RJP)
Master Plumber (MP)
Residential Master Plumber (RMP)
License Type(s)
Apprentice Plumber
Journeyman Plumber
Residential Apprentice Plumber
Residential Journeyman Plumber
License Type(s)
Apprentice Electrician
Journeyman Electrician
Master Electrician
Residential Journeyman Electrician
Residential Master Electrician
(1) “Electrical work” as used in Subsection 58-55-102(13)(a) and in this rule means installation, fabrication or assembly of equipment or systems included in “Premises Wiring” as defined by Title 15A, State Construction and Fire Codes Act. Electrical work includes installation of raceway systems used for any electrical purpose, and installation of field-assembled systems such as ice and snow melting, pipe-tracing, manufactured wiring systems, and the like. Electrical work does not include installation of factory-assembled appliances or machinery that are not part of the premises wiring unless wiring interconnections external to the equipment are required in the field, and does not include cable-type wiring that does not pose a hazard from a shock or fire initiation standpoint as defined by Title 15A, State Construction and Fire Codes Act. Wiring covered by the National Electrical Code that does not pose a hazard as described above includes Class 2 wiring as defined in Article 725, Power-Limited circuits as defined in Article 760 and wiring methods covered by Chapter 8. All other wiring is subject to licensing requirements.
CONTRACTOR CLASSIFICATIONS
Primary Classifications
E100 General Engineering Contractor
B100 General Building Contractor
B200 Modular Unit Installation Contractor
R100 Residential and Small Commercial Contractor
R200 Factory Built Housing Contractor
I101 General Engineering Trades Instructor
I102 General Building Trades Instructor
I103 Electrical Trades Instructor
I104 Plumbing Trades Instructor
I105 Mechanical Trades Instructor
S200 General Electrical Contractor
S210 General Plumbing Contractor
S220 Carpentry Contractor
S230 Siding Contractor
S240 Glass and Glazing Contractor
S250 Insulation Contractor
S260 General Concrete Contractor
S270 General Drywall and Plastering Contractor
S280 General Roofing Contractor
S290 General Masonry Contractor
S300 General Painting Contractor
S310 Excavation and Grading Contractor
S320 Steel Erection Contractor
S330 Landscaping Contractor
S340 Sheet Metal Contractor
S350 HVAC Contractor
S360 Refrigeration Contractor
S370 Fire Suppression Systems Contractor
S380 Swimming Pool and Spa Contractor
S390 Sewer and Water Pipeline Contractor
S400 Asphalt Paving Contractor
S410 Pipeline and Conduit Contractor
S420 General Fencing, Ornamental Iron and Guardrail Contractor
S430 Metal Firebox and Fuel Burning Stove Installer
S440 Sign Installation Contractor
S450 Mechanical Insulation Contractor
S460 Wrecking and Demolition Contractor
S470 Petroleum System Contractor
S480 Piers and Foundations Contractor
S490 Wood Flooring Contractor
S500 Sports & Athletic Courts, Running Tracks, and Playground Installation Contractor
S600 General Stucco Contractor
S700 Specialty License Contractor
Sub classifications
R101 Residential and Small Commercial Nonstructural Remodeling and Repair Contractor
S201 Residential Electrical Contractor
S202 Solar Photovoltaic Contractor
S211 Boiler Installation Contractor
S212 Irrigation Sprinkling Contractor
S213 Industrial Piping Contractor
S214 Water Conditioning Equipment Contractor
S215 Solar Thermal Systems Contractor
S216 Residential Sewer Connection and Septic Tank Contractor
S217 Residential Plumbing Contractor
S221 Cabinet, Millwork, Countertop Installation Contractor
S222 Overhead and Garage Door Opener Contractor
S231 Raingutter Installation Contractor
S261 Concrete Form Setting and Shoring Contractor
S262 Gunnite and Pressure Grouting Contractor
S263 Cementations Coating Systems, Resurfacing & Sealing
S272 Ceiling Grid Systems, Ceiling Tile and Panel Systems Contractor
S273 Light – weight Metal and Non – bearing Wall Partitions Contractor
S291 Stone Masonry Contractor
S292 Terrazzo Contractor
S293 Marble, Tile and Ceramic Contractor
S294 Cultured Marble Contractor
S321 Steel Reinforcing Contractor
S322 Metal Building Erection Contractor
S323 Structural Stud Erection Contractor
S351 Refrigerated Air Conditioning Contractor
S352 Evaporative Cooling Contractor
S353 Warm Air Heating Contractor
S421 Residential Fencing Contractor
S441 Non Electrical Outdoor Advertising Sign Contractor
S491 Laminate Floor Contractor
R156-55a-301. License Classifications – Scope of Practice.
(1) In accordance with Subsection 58-55-301(2), the classifications of licensure are listed and described in this section. The construction trades or specialty contractor classifications listed are those determined to significantly impact the public health, safety, and welfare. A person who is engaged in work which is included in the items listed in Subsections R156-55a-301(4) and (5) is exempt from licensure in accordance with Subsection 58-55-305(1)(i). 2
(2) Licenses shall be issued in the following primary classifications and
subclassifications:
E100 – General Engineering Contractor. A General Engineering contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(22).
B100 – General Building Contractor. A General Building contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(21) and pursuant to Subsection 58-55-102(21)(b) is clarified as follows:
(a) The General Building Contractor scope of practice does not include activities described in this Subsection under specialty classification S202 – Solar Photovoltaic Contractor unless the work is performed under the immediate supervision of an employee who holds a current certificate issued by the North American Board of Certified Energy Practitioners.
(b) The General Building Contractor scope of practice does not include activities described in this Subsection under specialty classification S354-Radon Mitigation Contractor unless
(i) the work is performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the National Radon Proficiency Program (AARST-NRPP); or
(ii) the work is limited to installation of passive radon gas controls on new construction in accordance with Appendix F of the International Residential Code.
B200 – Modular Unit Installation Contractor. Set up or installation of modular units as defined in Subsection 15A-1-302(8) and constructed in accordance with Section 15A-1-304. The scope of the work permitted under this classification includes construction of the permanent or temporary foundations, placement of the modular unit on a permanent or temporary foundation, securing the units together if required and securing the modular units to the foundations. Work excluded from this classification includes installation of factory built housing and connection of required utilities.
R100 – Residential and Small Commercial Contractor. A Residential and Small Commercial contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(32) and pursuant to Subsection 58-55-102(32) is clarified as follows:
(a) The Residential and Small Commercial Contractor scope of practice does not include activities described in this Subsection under specialty classification S202 – Solar Photovoltaic Contractor unless the work is performed under the immediate supervision of an employee who holds a current certificate issued by the North American Board of Certified Energy Practitioners.
(b) The Residential and Small Commercial Contractor scope of practice does not include activities described in this Subsection under specialty classification S354-Radon Mitigation Contractor unless:
(i) the work is performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the National Radon Proficiency Program (AARST-NRPP); or
(ii) the work is limited to installation of passive radon gas controls on new construction in accordance with Appendix F of the International Residential Code.
R101 – Residential and Small Commercial Non Structural Remodeling and Repair. Remodeling and repair to any existing structure built for support, shelter and enclosure of persons, animals, chattels or movable property of any kind with the restriction that no change is made to the bearing portions of the existing structure, including footings,foundation and weight bearing walls; and the entire project is less than $50,000 in total cost.
R200 – Factory Built Housing Contractor. Disconnection, setup, installation or removal of manufactured housing on a temporary or permanent basis. The scope of the work permitted under this classification includes placement of the manufactured housing on a permanent or temporary foundation, securing the units together if required, securing the manufactured housing to the foundation, and connection of the utilities from the near proximity, such as a meter, to the manufactured housing unit and construction of foundations of less than four feet six inches in height. Work excluded from this classification includes site preparation or finishing, excavation of the ground in the area where a foundation is to be constructed, back filling and grading around the foundation, construction of foundations of more than four feet six inches in height and construction of utility services from the utility source to and including the meter or 3 meters if required or if not required to the near proximity of the manufactured housing
unit from which they are connected to the unit.
I101 – General Engineering Trades Instruction Facility. A General Engineering
Trades Instruction Facility is a construction trades instruction facility authorized to teach the construction trades and is subject to the scope of practice defined in Subsection 58-55-102(22).
I102 – General Building Trades Instruction Facility. A General Building Trades Instruction Facility is a construction trades instruction facility authorized to teach the construction trades and is subject to the scope of practice defined in Subsections 58-55-102(21) or 58-55-102(32).
I103 – Electrical Trades Instruction Facility. An Electrical Trades Instruction Facility is a construction trades instruction facility authorized to teach the electrical trades and subject to the scope of practice defined in Subsection R156-55a-301(S200).
I104 – Plumbing Trades Instruction Facility. A Plumbing Trades Instruction Facility is a construction trades instruction facility authorized to teach the plumbing trades and subject to the scope of practice defined in Subsection R156-55a-301(S210).
I105 – Mechanical Trades Instruction Facility. A Mechanical Trades Instruction Facility is a construction trades instruction facility authorized to teach the mechanical trades and subject to the scope of practice defined in Subsection R156-55a-301(S350).
S200 – General Electrical Contractor. Fabrication, construction, and/or installation of generators, transformers, conduits, raceways, panels, switch gear, electrical wires, fixtures, appliances, or apparatus which utilizes electrical energy. The General Electrical Contractor scope of practice does not include activities described in this Subsection under specialty classification S354-Radon Mitigation Contractor unless the work is performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the National Radon Proficiency Program (AARST-NRPP).
S201 – Residential Electrical Contractor. Fabrication, construction, and/or installation of services, disconnecting means, grounding devices, panels, conductors, load centers, lighting and plug circuits, appliances and fixtures in any residential unit, normally requiring non-metallic sheathed cable, including multiple units up to and including a four-plex, but excluding any work generally recognized in the industry as commercial or industrial.
S202 – Solar Photovoltaic Contractor. Fabrication, construction, installation, and replacement of photovoltaic cell panels and related components. Wiring, connections and wire methods as governed in the National Electrical Code and Subsection R156-55b-102(1) shall only be performed by an S200 General Electrical Contractor or S201 Residential Electrical Contractor. This classification is not required to install stand alone solar systems that do not tie into premises wiring or into the electrical utility, such as signage or street or parking lighting.
A contractor who obtained this classification of licensure between January 1, 2009 and April 25, 2011 and who holds an active license may, in addition to the above, perform the following activities as part of the scope of practice under this subsection: fabrication, construction, installation, and repair of photovoltaic cell panels and related components including battery storage systems, distribution panels, switch gear, electrical wires, inverters, and other electrical apparatus for solar photovoltaic systems. Work excluded from this classification includes work on any alternating current system or system component.
S210 – General Plumbing Contractor. Fabrication and/or installation of material and fixtures to create and maintain sanitary conditions in buildings, by providing a permanent means for a supply of safe and pure water, a means for the timely and complete removal from the premises of all used or contaminated water, fluid and semi-fluid organic wastes and other impurities incidental to life and the occupation of such premises, and provision of a safe and adequate supply of gases for lighting, heating, and industrial purposes. Work permitted under this classification shall include the furnishing of materials, fixtures and labor to extend service from a building out to the main water, sewer or gas pipeline. The General Plumbing Contractor scope of practice does not include activities described in this Subsection under specialty classification S354-Radon Mitigation Contractor unless the work is performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the National Radon Proficiency Program (AARST-NRPP).
S211 – Boiler Installation Contractor. Fabrication and/or installation of firetube and water-tube power boilers and hot water heating boilers, including all fittings and piping, valves, gauges, pumps, radiators, converters, fuel oil tanks, fuel lines, chimney flues, heat insulation and all other devices, apparatus, and equipment related thereto in a closed system not connected to the culinary water system. Notwithstanding the foregoing, where water delivery for the closed system is connected to the culinary water system and separated from the culinary water system by a backflow prevention device, a contractor licensed under this subsection may connect the closed system to the backflow prevention device, which must be installed by an actively licensed plumber.
S212 – Irrigation Sprinkling Contractor. Layout, fabrication, and/or installation
of water distribution system for artificial watering or irrigation.
S213 – Industrial Piping Contractor. Fabrication and/or installation of pipes and piping for the conveyance or transmission of steam, gases, chemicals, and other substances including excavating, trenching, and back-filling related to such work. This classification includes the above work for geo thermal systems.
S214 – Water Conditioning Equipment Contractor. Fabrication and/or installation of water conditioning equipment and only such pipe and fittings as are necessary for connecting the water conditioning equipment to the water supply system within the premises.
S215 – Solar Thermal Systems Contractor. Construction, repair and/or installation of solar thermal systems up to the system shut off valve or where the system interfaces with any other plumbing system.
S216 – Residential Sewer Connection and Septic Tank Contractor. Construction of residential sewer lines including connection to the public sewer line, and excavation and grading related thereto. Excavation, installation and grading of residential septic tanks and their drainage.
S217 – Residential Plumbing Contractor. Fabrication and/or installation of material and fixtures to create and maintain sanitary conditions in residential building, including multiple units up to and including a four-plex by providing a permanent means for a supply of safe and pure water, a means for the timely and complete removal from the premises of all used or contaminated water, fluid and semi-fluid organic wastes and other impurities incidental to life and the occupation of such premises, and provision of a safe and adequate supply of gases for lighting and heating purposes. Work permitted under this classification shall include the furnishing of materials, fixtures and labor to extend service from a residential building out to the main water, sewer or gas pipeline. Excluded is any new construction and service work generally recognized in the
industry as commercial or industrial.
S220 – Carpentry Contractor. Fabrication for structural and finish purposes in a structure or building using wood, wood products, metal studs, vinyl materials, or other wood/plastic/metal composites as is by custom and usage accepted in the building industry as carpentry. Incidental work includes the installation of tub liners and wall systems.
S221 – Cabinet, Millwork and Countertop Installation Contractor. On-site construction and/or installation of milled wood products or countertops.
S222 – Overhead and Garage Door Contractor. The installation of overhead and garage doors and door openers.
S230 – Siding Contractor. Fabrication, construction, and/or installation of siding.
S231 – Raingutter Installation Contractor. On-site fabrication and/or installation of rain gutters and drains, roof flashings, gravel stops and metal ridges.
S240 – Glass and Glazing Contractor. Fabrication, construction, installation, and/or removal of all types and sizes of glass, mirrors, substitutes for glass, glassholding members, frames, hardware, and other incidental related work.
S250 – Insulation Contractor. Installation of any insulating media in buildings and structures for the sole purpose of temperature control, sound control or fireproofing, but shall not include mechanical insulation of pipes, ducts or conduits.
S260 – General Concrete Contractor. Fabrication, construction, mixing, batching, and/or installation of concrete and related concrete products along with the placing and setting of screeds for pavement for flatwork, the construction of forms, placing and erection of steel bars for reinforcing and application of plaster and other cement related products.
S261 – Concrete Form Setting and Shoring Contractor. Fabrication, construction, and/or installation of forms and shoring material; but, does not include the placement of concrete, finishing of concrete or embedded items such as metal reinforcement bars or mesh.
S262 – Gunnite and Pressure Grouting Contractor. Installation of a concrete product either injected or sprayed under pressure.
S263 – Cementatious Coating Systems Resurfacing and Sealing Contractor. Fabrication, construction, mixing, batching and installation of cementatious coating systems or sealants limited to the resurfacing or sealing of existing surfaces, including the preparation or patching of the surface to be covered or sealed.
S270 – General Drywall and Plastering Contractor. Fabrication, construction, and installation of drywall, gypsum, wallboard panels and assemblies. Preparation of drywall or plaster surfaces for suitable painting or finishing. Application to surfaces of coatings made of plaster, including the preparation of the surface and the provision of a base. This does not include applying stucco to lathe, plaster and other surfaces. Exempted is the plastering of foundations.
S272 – Ceiling Grid Systems, Ceiling Tile and Panel Systems Contractor. Fabrication and/or installation of wood, mineral, fiber, and other types of ceiling tile and panels and the grid systems required for placement.
S273 – Light-weight Metal and Non-bearing Wall Partitions Contractor. Fabrication and/or installation of light-weight metal and other non-bearing wall partitions.
S280 – General Roofing Contractor. Application and/or installation of asphalt, pitch, tar, felt, flax, shakes, shingles, roof tile, slate, and any other material or materials, or any combination of any thereof which use and custom has established as usable for, or which are now used as, water-proof, weatherproof, or watertight seal or membranes for roofs and surfaces; and roof conversion. Incidental work includes the installation of roof clamp ring to the roof drain.
S290 – General Masonry Contractor. Construction by cutting, and/or laying of all of the following brick, block, or forms: architectural, industrial, and refractory brick, all brick substitutes, clay and concrete blocks, terra-cotta, thin set or structural quarry tile, glazed structural tile, gypsum tile, glass block, clay tile, copings, natural stone, plastic refractories, and castables and any incidental works, including the installation of shower pans, as required in construction of the masonry work.
S291 – Stone Masonry Contractor. Construction using natural or artificial stone, either rough or cut and dressed, laid at random, with or without mortar. Incidental work includes the installation of shower pans.
S292 – Terrazzo Contractor. Construction by fabrication, grinding, and polishing of terrazzo by the setting of chips of marble, stone, or other material in an irregular pattern with the use of cement, polyester, epoxy or other common binders. Incidental work includes the installation of shower pans.
S293 – Marble, Tile and Ceramic Contractor. Preparation, fabrication, construction, and installation of artificial marble, burned clay tile, ceramic, encaustic, falence, quarry, semi-vitreous, and other tile, excluding hollow or structural partition tile. Incidental work includes the installation of shower pans.
S294 – Cultured Marble Contractor. Preparation, fabrication and installation of slab and sheet manmade synthetic products including cultured marble, onyx, granite, onice, corian, and corian type products. Incidental work includes the installation of shower pans.
S300 – General Painting Contractor. Preparation of surface and/or the application of all paints, varnishes, shellacs, stains, waxes and other coatings or pigments.
S310 – Excavation and Grading Contractor. Moving of the earth’s surface or placing earthen materials on the earth’s surface, by use of hand or power machinery and tools, including explosives, in any operation of cut, fill, excavation, grading, trenching, backfilling, or combination thereof as they are generally practiced in the construction trade.
S320 – Steel Erection Contractor. Construction by fabrication, placing, and tying or welding of steel reinforcing bars or erecting structural steel shapes, plates of any profile, perimeter or cross-section that are used to reinforce concrete or as structural members, including riveting, welding, and rigging.
S321 – Steel Reinforcing Contractor. Fabricating, placing, tying, or mechanically welding of reinforcing bars of any profile that are used to reinforce concrete buildings or structures.
S322 – Metal Building Erection Contractor. Erection of pre-fabricated metal structures including concrete foundation and footings, grading, and surface preparation.
S323 – Structural Stud Erection Contractor. Fabrication and installation of metal structural studs and bearing walls.
S330 – Landscaping Contractor.
(a) grading and preparing land for architectural, horticultural, or decorative treatment;
(b) arrangement, and planting of gardens, lawns, shrubs, vines, bushes, trees, or other decorative vegetation;
(c) construction of small decorative pools, tanks, fountains, hothouses, greenhouses, fences, walks, garden lighting of 50 volts or less, or sprinkler systems;
(d) construction of retaining walls except retaining walls which are intended to hold vehicles, structures, equipment or other non natural fill materials within the area located within a 45 degree angle from the base of the retaining wall to the level of where the additional weight bearing vehicles, structures, equipment or other non natural fill materials are located; or
(e) patio areas except that:
(i) no decking designed to support humans or structures shall be included; and
(ii) no concrete work designed to support structures to be placed upon the patio shall be included.
(f) This classification does not include running electrical or gas lines to any appliance.
S340 – Sheet Metal Contractor. Layout, fabrication, and installation of air handling and ventilating systems. All architectural sheet metal such as cornices, marquees, metal soffits, gutters, flashings, and skylights and skydomes including both plastic and fiberglass.
S350 – HVAC Contractor. Fabrication and installation of complete warm air heating and air conditioning systems, and complete ventilating systems. The HVAC Contractor scope of practice does not include activities described in this Subsection under specialty classification S354-Radon Mitigation Contractor unless the work is performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the
National Radon Proficiency Program (AARSTNRPP).
S351 – Refrigerated Air Conditioning Contractor. Fabrication and installation of air conditioning ventilating systems to control air temperatures below 50 degrees.
S352 – Evaporative Cooling Contractor. Fabrication and installation of devices, machinery, and units to cool the air temperature employing evaporation of liquid.
S353 – Warm Air Heating Contractor. Layout, fabrication, and installation of such sheet metal, gas piping, and furnace equipment as necessary for a complete warm air heating and ventilating system.
S354 – Radon Mitigation Contractor. Layout, fabrication, and installation of a radon mitigation system. This classification does not include work on heat recovery ventilation or makeup air components which must be performed by an HVAC Contractor and does not include electrical wiring which must be performed by an Electrical Contractor. Work performed under this classification shall be performed under the immediate supervision of an employee who holds a current certificate issued by the National Radon Safety Board (NRSB) or the National Radon Proficiency Program (AARST-NRPP).
S360 – Refrigeration Contractor. Construction and/or installation of refrigeration equipment including, but not limited to, built-in refrigerators, refrigerated rooms, insulated refrigerated spaces and equipment related thereto; but, the scope of permitted work does not include the installation of gas fuel or electric power services other than connection of electrical devices to a junction box provided for that device and electrical control circuitry not exceeding 50 volts.
S370 – Fire Suppression Systems Contractor. Layout, fabrication, and installation of fire protection systems using water, steam, gas, or chemicals. When a potable 7 sanitary water supply system is used as the source of supply, connection to the water system must be accomplished by a licensed plumbing contractor. Excluded from this classification are persons engaged in the installation of fire suppression systems in hoods above cooking appliances.
S380 – Swimming Pool and Spa Contractor. On-site fabrication, construction and installation of swimming pools, prefabricated pools, spas, and tubs.
S390 – Sewer and Waste Water Pipeline Contractor. Construction of sewer lines, sewage disposal and sewage drain facilities including excavation and grading with respect thereto, and the construction of sewage disposal plants and appurtenances thereto.
S400 – Asphalt Paving Contractor. Construction of asphalt highways, roadways, driveways, parking lots or other asphalt surfaces, which will include but will not be limited to, asphalt overlay, chip seal, fog seal and rejuvenation, micro surfacing, plant mix sealcoat, slurry seal, and the removal of asphalt surfaces by milling. Also included is the excavation, grading, compacting and laying of fill or base-related thereto. Also included in painting on asphalt surfaces including striping, directional and other types of symbols or words.
S410 – Pipeline and Conduit Contractor. Fabrication, construction, and installation of pipes, conduit or cables for the conveyance and transmission from one station to another of such products as water, steam, gases, chemicals, slurries, data or communications. Included are the excavation, cabling, horizontal boring, grading, and backfilling necessary for construction of the system.
S420 – General Fencing, Ornamental Iron and Guardrail Contractor. Fabrication, construction, and installation of fences, guardrails, handrails, and barriers.
S421 – Residential Fencing Contractor. Fabrication and installation of residential fencing up to and including a height of six feet.
S430 – Metal Firebox and Fuel Burning Stove Installer. Fabrication, construction, and installation of metal fireboxes, fireplaces, and wood or coal-burning stoves, including the installation of venting and exhaust systems, provided the individual performing the installation is RMGA certified.
S440 – Sign Installation Contractor. Installation of signs and graphic displays which require installation permits or permission as issued by state or local governmental jurisdictions. Signs and graphic displays shall include signs of all types, both lighted and unlighted, permanent highway marker signs, illuminated awnings, electronic message centers, sculptures or graphic representations including logos and trademarks intended to identify or advertise the user or his product, building trim or lighting with neon or decorative fixtures, or any other animated, moving or stationary device used for advertising or identification purposes. Signs and graphic displays must be fabricated, installed and erected in accordance with professionally engineered specifications and wiring in accordance with the National Electrical Code.
S441 – Non Electrical Outdoor Advertising Sign Contractor. Installation of signs and graphic displays which require installation permits or permission as issued by state and local governmental jurisdictions. Signs and graphics shall include outdoor advertising signs which do not have electrical lighting or other electrical requirements, and in accordance with professionally engineered specifications.
S450 – Mechanical Insulation Contractor. Fabrication, application and installation of insulation materials to pipes, ducts and conduits.
S460 – Wrecking and Demolition Contractor. The raising, cribbing, underpinning, moving, and removal of building and structures.
S470 – Petroleum Systems Contractor. Installation of above and below ground petroleum and petro-chemical storage tanks, piping, dispensing equipment, monitoring equipment and associated petroleum and petro-chemical equipment including excavation, backfilling, concrete and asphalt.
S480 – Piers and Foundations Contractor. The excavation, drilling, compacting, pumping, sealing and other work necessary to construct, alter or repair piers, piles, footings and foundations placed in the earth’s subsurface to prevent structural settling and to provide an adequate capacity to sustain or transmit the structural load to the soil or rock below.
S490 – Wood Flooring Contractor. Installation of wood flooring including
prefinished and unfinished material, sanding, staining and finishing of new and existing
8 wood flooring. Underlayments, non-structural subfloors and other incidental related work.
S491 – Laminate Floor Installation Contractor. Installation of laminate floors including underlayments, non-structural subfloors and other incidental related work, but does not include the installation of sold wood flooring.
S500 – Sports and Athletic Courts, Running Tracks, and Playground Installation Contractor. Installation of sports and athletic courts including but not limited to tennis courts, racquetball courts, handball courts, basketball courts, running tracks, playgrounds, or any combination. Includes nonstructural floor subsurfaces, nonstructural wall surfaces, perimeter walls and perimeter fencing. Includes the installation and attachment of equipment such as poles, basketball standards or other equipment.
S510 – Elevator Contractor. Erecting, constructing, installing, altering, servicing, repairing or maintaining an elevator.
S600 – General Stucco Contractor. Applying stucco to lathe, plaster and other surfaces.
S700 – Specialty License Contractor.
(a) A specialty license is a license that confines the scope of the allowable contracting work to a specialized area of construction which the Division grants on a case-by-case basis.
(b) When applying for a specialty license, an applicant, if requested, shall submit to the Division the following:
(i) a detailed statement of the type and scope of contracting work that the applicant proposes to perform; and
(ii) any brochures, catalogs, photographs, diagrams, or other material to further clarify the scope of the work that the applicant proposes to perform.
(c) A contractor issued a specialty license shall confine the contractor’s activities to the field and scope of operations as outlined by the Division.
(3) The scope of practice for the following primary classifications includes the
scope of practice stated in the descriptions for the following subsclassifications:
Utah Division of Water Rights:
General Contact Information
Mailing Address
Utah Division of Water Rights
1594 West North Temple Suite 220
P.O. Box 146300
Salt Lake City, Utah 84114-6300
Phone Number – Public Assistance
801-538-7240
waterrights@utah.gov.
WATER WELL DRILLERS LICENSE: $350 Filing Fee
DRILL RIG OPERATOR REGISTRATION: $100 Filing Fee
PUMP INSTALLER LICENSE: $200 Filing Fee
PUMP RIG OPERATOR REGISTRATION: $75 Filing Fee
Utah DOT:
Contact:
Phone: 801-965-4000
E-mail: srwebmail@utah.gov
There is a reason you use CPAs and Attorneys. We know the license regulations like your CPA knows the tax code. Trust your business and contractor’s license to the experts at NCLA.
Click here to fast track the process!
